Siemens TPS3BL1590VX02 Type 2 External Low Voltage Non-Metallic True 10-Mode Protection Surge Protective Device With Surge Counter, 120/240 VAC, 47 to 63 Hz, 200 kA SCCR, 3 Phase

Siemens Surge Protective Device, Type 2 External Low Voltage Non-Metallic True 10-Mode Protection, Series: TPS3 L15, 120/240 VAC, 47 to 63 Hz, 4+G Wires, 200 kA Short Circuit Current, 900 kA Peak Surge, 20 kA Nominal Discharge, Modes of Protection: L-N, L-G, N-G, L-L, <1 ns Response, LED Indicator, 3 Phase, Environmental Conditions: -15 to 140 deg F Operating, 0 to 95% Non-Condensing Relative Humidity, NEMA 4X, Wall Mount, Load Terminal, Gray, 20 in L x 20 in W x 7 in H

TPS3 L15 are UL 1283 listed incorporating EMI/RFI or sine wave tracking filtering designed to condition low energy L-N coupled noise. When installed at the electrical service entrance, it can be used for UL 96A compliance (20 kA In). Standard monitoring includes protection status indication LEDs, audible alarm and dry contacts. Complete protection is intact when the status indicators are illuminated. When protection is lost, the status indicator will extinguish, the red service light will illuminate and the dry contacts will change state. An optional surge counter is available. A new diagnostic feature integrated within the TPS3 L15 is Ground Integrity Monitoring or (GIM) diagnostic indication circuit. Ground Integrity Monitoring or (GIM) diagnostics monitors the health of the electrical system's neutral to ground bond. If voltage is seen across neutral and ground, the phase indicators will remain illuminated, while the red service light begins to flash alerting the end user that the electrical system grounding needs to be checked and serviced. This feature can be remotely monitored via the dry contact outputs. Siemens TPS3s are one of the first in the industry to offer this power quality safety and performance indication.