Skip to main content Skip to main content

Siemens

Siemens SIMOTICS S A6X30107841 1-Stage Compact Natural Cooling Servo Motor, 6.46 hp, 10.1 A, 4000 rpm Speed, IM B5IM V1IM V3 Mount

Siemens_A6X30057347.jpg

Description

Siemens SIMOTICS S Servo Motor, 1-Stage Compact Natural Cooling, Series: 1FT7 SP+ Series, Permanent Magnet Synchronous Special Features, 6.46 hp, 10.1 A, 4000 rpm Speed, IP65 Enclosure, 32 mm Dia x 80 mm H Shaft, Tapered Roller Bearing, 11.5 N-m Torque, IM B5/IM V1/IM V3 Mounting, 104 deg F, Insulation Class: Class F, 6.1 in W Dimensions

SIMOTICS S-1FT7 motors can be combined with planetary gearboxes to form compact coaxial drive units. The gearboxes are flanged directly to the drive end of the motors. When selecting the gearbox, ensure that its maximum permissible input speed is not exceeded by the maximum speed of the motor. In the case of high operating frequencies, allowance must be made for the factor f2 (see configuration Manual, SIMOTICS S-1FT7 synchronous motors). The frictional losses of the gearbox must always be taken into account when engineering geared drives. The gearboxes are only available in non-balanced design.

Features

  • With classic flange, AS24DQI encoder RJ45 signal connection, DRIVE-CLiQ interface
  • With plain shaft extension, tolerance N shaft and flange accuracy, planetary gearbox, without holding brake
  • With feather key gear shaft
  • High efficiency 1-stage: >97%, 2-stage: >94%
  • Minimum torsional backlash 1-stage: ≤ 4 arc min, 2-stage: ≤ 6 arc min
  • Power transmission from the central sun wheel via planet wheels
  • No shaft deflections in the planet wheel set due to symmetrical force distribution
  • Very low moment of inertia and thus short acceleration times of the motors
  • Output shaft bearings dimensioned for high cantilever and axial loads with preloaded tapered-roller bearings
  • The gearboxes are connected to the motor shaft via an integrated clamping hub
  • A plain motor shaft extension is necessary for this purpose
  • The motor flange is adapted by means of adapter plates
  • Output shaft of gearbox exactly coaxial with the motor
  • The gearboxes are enclosed (seal between gearbox and motor) and filled with oil at the factory
  • They are lubricated and sealed for their service life
  • The gearboxes are suitable for all mounting positions
  • Small dimensions
  • Low weight

Specifications

GTIN: 00804766186134

UNSPSC: 26101109

Country of Origin: Germany

Type
1-Stage Compact Natural Cooling
Torque Rating
11.5 N-m
Shaft Size
32 mm Dia x 80 mm H
Speed
4000 rpm
Insulation Class
Class F
Enclosure Type
IP65
Dimensions
6.1 in W
Mounting Type
IM B5/IM V1/IM V3
Series
1FT7 SP+ Series
Bearing Type
Tapered Roller
Special Features
Permanent Magnet Synchronous
Amperage Rating
10.1 A
Temperature Rating
104 deg F
Horsepower
6.46 hp
BABA Compliant
No
Sold as
EACH

Documents

Recently Viewed Products

Reviews