Skip to main content Skip to main content

Siemens TPS3A0120XW02 TPS3 01 Type 2 Internal Low Voltage Standard Mode Surge Protective Device With Surge Counter, 120240 VAC, 47 to 63 Hz, 100 kA SCCR, 1 Phase

Siemens_TPS3A0110X0B2.jpg

Description

Siemens Surge Protective Device, Type 2 Internal Low Voltage Standard Mode, Series: TPS3 01, 120/240 VAC Electrical Rating, 47 to 63 Hz Frequency, 3+G Wires, 100 kA Short Circuit, 200 kA Peak Surge Current, 20 kA Nominal Discharge, Modes of Protection: L-N, L-G, N-G, L-L, <0.5 ns Response, LED/Audible Alarm Indicator, 1 ph, Environmental Conditions: -15 to 140 deg F Operating, 1 to 95% Non-Condensing Relative Humidity, NEMA 1 Enclosure, Wall Mounting, Load Terminal, Aluminum, Black, 11.5 in L x 7.2 in W x 4.5 in H Dimensions

Siemens TPS3 01 surge protective devices are designed for integration within our P1, P2 and P3 power distribution panel boards, as well as TIASTAR motor control centers and busway systems. The TPS3 01 SPDs feature Ground Integrity Monitoring (GIM) diagnostics.

Features

  • TPS TranSafe enabled - our patented TranSafe fault current protection circuitry provides peace of mind that your electronic loads are protected and that your electrical system will not go down due to SPD fault control operations
  • Integral or internally mounted for optimized protection - internal surge protection dramatically reduces installation impedance allowing for superior installed suppressed voltage capabilities
  • SAD/MOV hybrid suppression - for mission critical applications needing the absolute best suppressed voltage, our hybrid SAD/MOV suppressors combine tight clamping technology with integrated suppression, delivering the strongest installed protection capabilities available
  • Low suppressed voltage ratings - TPS family offers some of the lowest UL 1449 listed suppressed voltage ratings available, meaning your electronics will last longer when compared to SPDs with higher ratings
  • UL 96A lightning protection master labeling compliant
  • Large block, individually fused, thermally protected, 50 kA MOVs
  • Every MOV is monitored, including N-G
  • Mounts internal to P1, P2 and P3 panels, TIASTAR motor control centers standard 6 in bucket, STP series bus plug on SX series busway
  • Consult factory for field retrofit in P1 panels
  • All UL required OCP and safety coordination included - type 1 SPDs intended for line or load side of main disconnect, type 2 SPDs intended for load side of main disconnect
  • Standard monitoring - LED indicators, dry contacts, audible alarm with silence switch and test button
  • 5000 hits repetitive impulse
  • Direct bus connected or can be wired to a circuit breaker
  • 700 V L-N, 700 V L-G, 700 V N-G, 1200 V L-L voltage protection rating

Specifications

GTIN: 00804766259647

UNSPSC: 39121610

Alternative Part Number: 13855693

Country of Origin: United States of America (the)

Type
Type 2 Internal Low Voltage Standard Mode
Color
Black
Width
2.6 in
Nominal Discharge Current
20 kA
Enclosure Type
NEMA 1
Mounting Type
Wall
Phase
1
Material
Aluminum
Response Time
<0.5 ns
BABA Compliant
No
Electrical Ratings
120/240 VAC
Environmental Conditions
-15 to 140 deg F Operating, 1 to 95% Non-Condensing Relative Humidity
Indicator Type
LED/Audible Alarm
Series
TPS3 01
Peak Surge Current
200 kA
Dimensions
11.5 in L x 7.2 in W x 4.5 in H
Short Circuit Current Rating
100 kA
Modes of Protection
L-N, L-G, N-G, L-L
Weight
0.7 lbs
Frequency Rating
47 to 63 Hz
Number of Wires
3+G
Terminal Type
Load
Sold as
EACH

Recently Viewed Products

Loading recently viewed products...

Reviews

Loading product reviews...
Loading product details...