Skip to main content Skip to main content

Siemens

Siemens SIMOTICS M A6X30103623 Compact Forced Ventilated Induction Motor With High Power Density, IP55 Enclosure, 148 hp, 168 hp, 201 hp, 208 hp, 400/480 VAC, 27/33.7/37/23.9 Hz, 3 Phase, 700/800/1000/1100 rpm Speed, IM B3/IM V6 Mount

Siemens_A6X30073637.jpg

Description

Siemens SIMOTICS M Induction Motor, Compact Forced Ventilated, Series: 1PH8, Crane Motor Application, Asynchronous, Main Spindle Drive Motor, Squirrel Cage Rotor Special Features, 148 hp, 168 hp, 201 hp, 208 hp, 400/480 VAC, 220/230/235/240 A, 27/33.7/37/23.9 Hz Frequency, 3 ph, 700/800/1000/1100 rpm Speed, IP55 Enclosure, 95 mm Dia x 280 mm H Shaft, 1346/1433/1492/1501 N-m Torque, IM B3/IM V6 Mounting, 104 deg F, Insulation Class: Class H, 51.81 in L x 22.91 in W x 41.02 in H Dimensions

The simotics M-1PH8 Series is the latest motor generation for universal use with motion control applications. The wide power range is aimed at use as a central machine drive (as what is known as a "main motor") for various applications. The motors are available as an asynchronous variant as well as a compact synchronous variant with either forced ventilation or water cooling, based on a flexible building block principle. The flexible configuration such as storage or electrical connection technology allows you to adapt the motors to the requirements of almost any industrial application.

Features

  • With HTL 1024 S/R incremental encoder, without DRIVE-CLiQ interface
  • With feather key shaft extension, half key balancing
  • Standard bearing, R/A vibration severity grade according to Siemens/EN 60034-14, R shaft and flange accuracy grade
  • NDE terminal box, right cable entry, below signal connection by looking at de
  • With undrilled cable entry plate
  • Low space requirements thanks to high power density
  • Performance capability thanks to wide rotational speed setting ranges
  • High degree of structural flexibility due to the choice of asynchronous or synchronous design, forced ventilation or water cooling, mechanical designs
  • Minimized maintenance costs thanks to high bearing service lives
  • Precise motion control thanks to high rotational accuracy, even at the lowest speeds
  • Maximum thermal utilization over the complete speed range
  • Quiet operation as a result of low sound pressure level
  • Optimized for the SINAMICS S120 drive system
  • 148 hp, 1501 N-m, 240 A at 400 VAC smart/basic line module
  • 168 hp, 1492 N-m, 235 A at 400 VAC active line module
  • 201 hp, 1433 N-m, 230 A at 480 VAC smart/basic line module
  • 208 hp, 1346 N-m, 220 A at 480 VAC active line module
  • Without holding brake

Specifications

GTIN: 00804766083617

UNSPSC: 26101114

Alternative Part Number: 1PH82841HC102BU1-Z K23+P00+X15

Amperage Rating
220/230/235/240 A
Application Type
Crane Motor
Dimensions
51.81 in L x 22.91 in W x 41.02 in H
Enclosure Type
IP55
Frequency Rating
27/33.7/37/23.9 Hz
Horsepower
148 hp, 168 hp, 201 hp, 208 hp
Insulation Class
Class H
Mounting Type
IM B3/IM V6
Phase
3
Series
1PH8
Shaft Size
95 mm Dia x 280 mm H
Special Features
Asynchronous, Main Spindle Drive Motor, Squirrel Cage Rotor
Speed
700/800/1000/1100 rpm
Temperature Rating
104 deg F
Torque Rating
1346/1433/1492/1501 N-m
Type
Compact Forced Ventilated
Voltage Rating
400/480 VAC
Weight
0.8 lbs
Width
7.6 in
Sold as
EACH

Documents

Recently Viewed Products

Reviews