Description
GE Spec-Setter™ Safety Switch, Type TH Fused Heavy Duty, 240 VAC, 200 A, 15 hp, 25 hp, 60 hp, 40 hp, 1/3 ph, 50/60 Hz Frequency, 3 Pole, 4 Wires, 200 kA Short Circuit, Donut Handle Actuator, Class H/J/K/R Insulation, NEMA 5/12 Enclosure, 3-Point/Self-Leveling Mounting, Line/Load Lug Terminal, 60 to 75 deg C, 15.1 in W x 10.1 in D x 35.1 in H Dimensions, Stainless Steel, Hot Dipped Galvanized/Powder Coated
GE heavy duty safety switches are designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Heavy duty switches are available in 30 to 1200 A, 600 VAC, 600 VDC maximum, fusible and non-fusible units and in NEMA Type 1 (indoor), Type 3R (outdoor), Type 4/4X (water and dust-tight, corrosion resistant) and Type 5/12 (drip and dust-tight) enclosures. When used with Class R or J fuses, 30 to 600 A switches have a UL Listed short circuit rating of 200000 A rms symmetrical. Switches rated 800 to 1200 A use Class L fuses and have a UL Listed short circuit rating of 100000 A rms symmetrical. GE heavy duty safety switches are UL Listed as service entrance equipment when installed in accordance with the National Electrical Code.
Features
- Highly visible ON/OFF label takes the guesswork out of safety and gives a clean, modern appearance
- Coin-proof, defeatable dual interlocks meet all safety inspection requirements
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- Three-point mounting pattern speeds installation and simplifies ganging in close quarters
- Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts
- Plated blades provide visible confirmation of contact position
- Direct-drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive ON/OFF indication while prolonging switch life
- Spring-reinforced fuse clips assure reliable contact for cool operation
- Suitable for class H, K, J or R fuses
- 15 hp at 240 VAC standard fuse, 25 hp at 240 VAC standard fuse, 60 hp at 240 VAC time delay, 40 at 250 VDC horsepower rating
Specifications
GTIN: 00783164092240
UNSPSC: 39122205
| Terminal Type | Line/Load Lug |
|---|---|
| Number of Wires | 4 |
| Number of Poles | 3 |
| Frequency Rating | 50/60 Hz |
| Voltage Rating | 240 VAC |
| Weight | 0.7 lbs |
| Short Circuit Current Rating | 200 kA |
| Insulation Type | Class H/J/K/R |
| Mounting Type | 3-Point/Self-Leveling |
| Phase | 1/3 |
| Material | Stainless Steel |
| Amperage Rating | 200 A |
| Finish | Hot Dipped Galvanized/Powder Coated |
| Temperature Rating | 60 to 75 deg C |
| BABA Compliant | No |
| Dimensions | 15.1 in W x 10.1 in D x 35.1 in H |
| Enclosure Type | NEMA 5/12 |
| Actuator Type | Donut Handle |
| Type | Type TH Fused Heavy Duty |
| Horsepower | 15 hp, 25 hp, 60 hp, 40 hp |
| Sold as | EACH |
Documents
Recently Viewed Products
Loading recently viewed products...
Reviews
Loading product reviews...
Loading product details...